Sable car GAZ-2752, 2217, 2310>> Forward suspension bracket>> Replacement of the top spherical support

Replacement of the top spherical support

 PERFORMANCE ORDER

We work at a firm equal platform.

We raise a jack a forward part of the car and we remove a forward wheel (see. Removal of wheels).
We establish under a car frame a support of factory manufacturing with a permissible load not less than 2 t.
We establish under the bottom lever of a forward suspension bracket a jack (better podkatny) and we raise the lever on some centimeters while the chipper of the top lever will not depart from an emphasis.
We take out a rubber hose from an arm opening (see. Replacement of brake shoes of a forward wheel).

In easy blows of a hammer on a chisel we unbend edge of an arm of fastening of a brake hose.

Key «on 30» we turn on a nut of a finger of the top spherical support and we remove from a finger an arm of fastening of a brake hose.

In hammer blows on a rack (it is better through other hammer) we beat out a finger from a rack opening.

Head «on 17» we turn on three nuts of bolts of fastening of a spherical support to the lever, holding bolts from a provorachivaniye a key «on 17».

We take out a spherical support from an opening of the top lever.

We establish a spherical support in return sequence, having convinced of absence люфта and integrity of a protective cover.
We bend edge of an arm of a brake hose, zakontrivy a finger nut.