Sable car GAZ-2752, 2217, 2310>> Forward suspension bracket>> Shock-absorber replacement

Shock-absorber replacement


We work at a viewing ditch.

For convenience we raise a jack a forward part of the car and we remove a forward wheel (see. Removal of wheels).

Holding a shock-absorber rod a special key (see. Appendices) or a key «on 6», we turn on a key «on 17» a lock-nut and a nut of fastening of a rod of the shock-absorber.

We remove from a rod a washer …

… and rubber pillow.

Head «on 13» we turn on two nuts of the bottom fastening of the shock-absorber.

We take out the shock-absorber down, deducing it through an opening in the bottom cup of a spring.

The shock-absorber is filled with nitrogen and working liquid under the pressure of 15 kgfs/cm2. Therefore it is not necessary to assort it.

We establish the shock-absorber in return sequence.

If necessary we replace fixing details.

We recommend to replace at once both shock-absorbers.