Sable car GAZ-2752, 2217, 2310>> Forward suspension bracket>> Removal of a rack of a forward suspension bracket

Removal of a rack of a forward suspension bracket

 PERFORMANCE ORDER

We remove a brake bracket (see. Replacement of a bracket of a brake of a forward wheel), without disconnecting a brake hose, and a bracket we tie up a wire to a stabilizer rack.
We disconnect steering draft from the lever of a steering trapeze (see. Replacement of steering drafts and their hinges).
We raise a jack the bottom lever to a separation of a chipper of the top lever from an emphasis to unload spherical support.
We turn on nuts of bolts of fastening of spherical support (see. Replacement of the top spherical support and Replacement of the bottom spherical support).
Pay attention: the nut of the bottom spherical finger (koronchaty) is stopped shplinty, and the nut of the top finger is stopped by bending back of edge of an arm of a brake hose.
We beat out fingers of spherical support from landing openings (see. Replacement of the top spherical support and Replacement of the bottom spherical support).

We remove a rack from a nave assembled with the lever of a steering trapeze and the bottom spherical hinge.

If necessary we remove from a rack a nave (see. Replacement of bearings and a nave cuff) and the bottom spherical support (see. Replacement of the bottom spherical support).
We establish a rack in return sequence.