Sable car GAZ-2752, 2217, 2310>> Zadny Bridge>> Replacement of a cuff of a leading gear wheel

Replacement of a cuff of a leading gear wheel

 PERFORMANCE ORDER

It is more convenient to work at a viewing ditch.

We disconnect from the back bridge kardanny transfer (see. Removal of kardanny transfer).

Rasshplintovyvayem nut of a shaft of a leading gear wheel.

Holding a shaft flange a trumpet key, a head «on 24» we turn on a nut.

We remove a washer.

Tapping with a hammer, we remove a flange of a leading gear wheel.

By screw-driver it is hooked and we take out a cuff.

Having greased edges of a new cuff of Litolom-24, we press it, using an old cuff as an opravka.

It is impossible to press a cuff deeply. Its external end face should be aflush with an opening edge in a reducer case.

We establish all details in return sequence, thus …

… a nut of a shaft we tighten the moment 16–20 кгс.м before cut coincidence in it with an opening under шплинт.