Sable car GAZ-2752, 2217, 2310>> Transmission>> Replacement of cuffs

Replacement of cuffs


In a transmission three cuffs are established: one – in a cover of the bearing of primary shaft and two in the extension piece of a back case. For replacement of the last removal of a transmission is not required.
We remove kardanny transfer (see. Removal of kardanny transfer).

Hooking a screw-driver, consistently we take both cuffs from the extension piece of a back case.

Having greased Litolom-24 working edges of new cuffs, we press them via the suitable plug or an old cuff.

Replacement of a cuff of primary shaft is shown in the section transmission Dismantling.
We establish the dismantled units (see appropriate sections). After replacement of back cuffs without removal of a transmission from the car we check level of oil and if necessary we add it.