Sable car GAZ-2752, 2217, 2310>> Coupling>> Removal of a case of coupling

Removal of a case of coupling

 PERFORMANCE ORDER

Work we carry out on a viewing ditch.

We remove a transmission (see. Transmission removal).
Without merging working liquid, we turn on bolts of fastening of the working cylinder and we remove it from a coupling case (see. Removal of the working cylinder of a hydraulic actuator).

Through an opening of a case of coupling we take out the coupling of switching off of coupling with the vyzhimny bearing.

For fork removal by a key «on 10» we turn on a bolt of fastening of a boot …

… also we take out a fork of switching off of coupling from a case.

Cap key or head «on 17» we turn on nuts of three bottom bolts of fastening of a case, holding bolts with a key «on 14».

We take out bolts from openings.

Head «on 14» we turn on seven bolts of fastening of the case two of which at the same time serve for starter fastening (they longer).

We remove a coupling case from two directing pins intended for its centering.
We establish a coupling case in return sequence, having filled a spherical nest of the fork, rubbing surfaces of the coupling of switching off and a shlitsa of a conducted disk with CV JOINT-4 greasing.