Sable

General information
Governing bodies and devices
ZMZ-4063 engine
Power supply system
K-151 carburetor
Cooling system
System of production of the fulfilled gases
Coupling
   Pumping of a hydraulic actuator of switching off of coupling and replacement of working liquid
   Removal of the main cylinder of a hydraulic actuator
   Removal of the working cylinder of a hydraulic actuator
   Replacement of a hose of a hydraulic actuator
   Removal of a case of coupling
   Removal of disks of coupling
Transmission
Kardanny transfer
Zadny Bridge
Forward suspension bracket
Back suspension bracket
Steering
Brake system
Electric equipment
Frame, cabin, body
Ventilation and heating system
Diagnostics of malfunctions
Appendices



bd34e463


Sable car GAZ-2752, 2217, 2310>> Coupling>> Removal of the main cylinder of a hydraulic actuator

Removal of the main cylinder of a hydraulic actuator

 PERFORMANCE ORDER

We merge from a hydraulic actuator working liquid (see. Pumping of a hydraulic actuator of switching off of coupling and replacement of working liquid).

Key «on 12» we turn on the tube union from the main cylinder.

Under the dashboard, holding a rod axis with a key «on 19», a key «on 17» we turn on a nut …

… also we take out a rod axis …

… and plastic plugs.

Key «on 13» we turn on two nuts of fastening of the main cylinder.

We remove the main cylinder of a hydraulic actuator.

For providing a course of a pedal of coupling within 145–160 mm and a course of a rod of the working cylinder not less than 14 mm we regulate a vystupaniye of a rod of the main cylinder.

Big screw-driver and key «on 13» we weaken a lock-nut then we reduce or we increase a rod vystupaniye, turning or turning on a rod.

Having tightened a lock-nut, we establish the main cylinder of a hydraulic actuator in return sequence. Plastic plugs it is greased with any plastic greasing.