Sable car GAZ-2752, 2217, 2310>> System of production of the fulfilled gases>> Replacement of the exhaust silencer, resonator and exhaust pipe

Replacement of the exhaust silencer, resonator and exhaust pipe

 PERFORMANCE ORDER

The exhaust silencer and the resonator is replaced in case of their burn-out or through corrosion. It is thus better to replace all system assembled.

It is more convenient to work together at a viewing ditch.

Previously we clear all connections of dirt, obstukivay a hammer and we process getting WD-40 liquid.

Key «on 13» we weaken an inhaling of two nuts of a collar of connection of the exhaust silencer and the resonator …

… and similarly — a collar of connection of the exhaust silencer and an exhaust pipe.

We shift collars from exhaust silencer branch pipes.

If because of corrosion to unscrew nuts it is not possible, we cut a collar a hacksaw or the detachable machine.

Key «on 13» we weaken a collar of connection of parts of an exhaust pipe.

Key «on 13» we turn on two nuts of fastening of a collar of an exhaust pipe to an arm …

… also we remove a collar from a pipe.

Obstukivayem connections of a pipe with the exhaust silencer also we remove an exhaust pipe entirely or in parts.

Keys «on 12» and «on 13» we weaken two collars of fastening of the exhaust silencer.

Tapping through a wooden pro-rate, we shift the exhaust silencer back and we remove it.

Key «on 13» we weaken a collar of connection of the resonator and reception pipes.

Through a wooden pro-rate we force down the resonator from a reception pipe and we remove it.

At assembly we put on connections of pipes and a carving of collars graphitic greasing. The exhaust silencer is established by a seam down, thus the seam should enter into dredging in the bottom half ring of a fixing collar.
If necessary it is possible to replace shock-absorbers of a suspension bracket of the exhaust silencer and an exhaust pipe without removal of elements of final system. For this purpose …

… пассатижами we take out шплинт and we remove a washer of the bottom fastening of the shock-absorber.

Having similarly removed a washer of the top fastening, …

… we remove the rubber shock-absorber.

We establish the new shock-absorber in return sequence. The remained shock-absorbers it is replaced similarly.