Sable car GAZ-2752, 2217, 2310>> ZMZ-4063 engine>> Removal of a final collector

Removal of a final collector

 PERFORMANCE ORDER

We remove an engine mudguard (see. Removal of a mudguard of the engine).
We remove the exhaust silencer and the resonator (see. Replacement of the exhaust silencer, resonator and exhaust pipe).
We disconnect a reception pipe from a final collector, for what:

holding with a key «on 12» a bolt of fastening of a reception pipe to a transmission, a key «on 13» we turn on two nuts.

We take out a bolt and we disconnect a reception pipe from an arm of its fastening.

By head «on 14» with the extension piece it is turned on four nuts of fastening of reception pipes to a collector.

We lower reception pipes and we remove from collector hairpins sealing laying.

Key «on 22» we turn on a nut of a tube of system of a retsirkulyatsiya and we disconnect a tube from the collector union.

For convenience a key «on 10» we turn on a nut of fastening and we remove a branch pipe of a "summer" fence of air from the body panel.

Head «on 14» we turn on eight nuts of fastening of a collector.

We remove from hairpins the screen of a fence of warm air …

… and assembly eye (eye).

We remove a final collector.

We remove from hairpins four copper laying.

We establish a final collector in return sequence.
Having started up the engine for some minutes, we are convinced of absence of break of gases, if necessary we tighten not tight connections.