Sable car GAZ-2752, 2217, 2310>> Power supply system>> Removal of the sensor of the index of level of fuel and toplivozabornik

Removal of the sensor of the index of level of fuel and toplivozabornik

 PERFORMANCE ORDER

We remove back passenger seats (see. Removal of passenger seats).
If the car is equipped with the hatch in a floor for access to the hatch of a fuel tank, we uncover the hatch (see. Removal of a covering of a floor).

By screw-driver it is turned on саморезы hatch fastenings.

If on the car a floor without the hatch...

... having wrapped edge of a rug of a floor...

… a key «on 10» we turn on two bolts of fastening of a plywood covering to a floor …

… also we remove a part of a plywood covering of a floor.

Key «on 12» we turn on two bolts of fastening of a beam of seats.

We shift a beam and its cнимаем.

By Shlitseva a screw-driver it is turned on саморезы hatch fastenings...

... also we remove the hatch together with laying.

Key «on 8» we turn on two nuts of fastening of tips of wires of the sensor of the index of level of fuel, having remembered an order of their connection.

By Shlitseva a screw-driver it is turned on five screws of fastening of the sensor (one of them fixes a tip of a wire of "weight")...

… also we take out it together with laying.

We establish the sensor in return sequence. At assembly laying we establish a ledge to the car center, and the sensor – a float to a back part of the car.
For removal of a toplivozabornik...

... having weakened an inhaling of collars, we remove the intaking …

… and drain hoses.

By Shlitseva a screw-driver it is turned on five screws of fastening of a toplivozabornik to a tank, …

… we remove a toplivozabornik …

… and its laying.

Hand we take away the case of the mesh filter, compressing a spring, and flat-nose pliers took out a lock pin, …

… we remove the filter, two washers and a spring.

Having washed out details in solvent, we collect and we establish a toplivozabornik in return sequence.