Sable car GAZ-2752, 2217, 2310>> ZMZ-4063 engine>> Removal of the inlet pipeline

Removal of the inlet pipeline

 PERFORMANCE ORDER

We merge cooling liquid (see. Replacement of cooling liquid).
We remove the carburetor (see. Carburetor removal).

Key «on 17» we turn on a nut of the right fastening of the valve of a retsirkulyatsiya.

We remove from a hairpin a tip of a wire of "weight".

Key «on 13» we turn on a nut of the left fastening of the valve.

We disconnect a hose of the valve or from the union of the thermovacuum switch...

... or from the union of the valve of a retsirkulyatsiya.

We remove the valve …

… and copper laying.

We disconnect a hose of the vacuum amplifier of brake system from the union of the inlet pipeline.

Key «on 22» we turn on a cap nut …

… also we disconnect a retsirkulyatsiya tube from the pipeline.

From the inlet pipeline we disconnect a hose of removal of cooling liquid (from below).

By head «on 14» with the extension piece it is turned on five nuts of fastening of the inlet pipeline to a block head цилиндов.

We remove the pipeline from hairpins.

We disconnect from the inlet pipeline bringing hose of cooling liquid.

We remove from hairpins laying of the inlet pipeline.

Key «on 27» we turn on the thermovacuum switch.

Key «on 10» we turn on five bolts of fastening of a cover of a shirt of heating of the inlet pipeline.

We uncover …

… and sealing laying.

Key «on 17» we turn on the union of system of a retsirkulyatsiya.

We establish the removed details in return sequence, having replaced all laying with the new.