Sable car GAZ-2752, 2217, 2310>> ZMZ-4063 engine>> Dismantling of a drive of the oil pump

Dismantling of a drive of the oil pump

 PERFORMANCE ORDER

We remove a drive of the gas-distributing mechanism (see. Dismantling of a drive of the gas-distributing mechanism). If thus a head of the block of cylinders did not remove, we remove the inlet pipeline (see. Removal of the inlet pipeline).

Key «on 12» we turn on two bolts of fastening of a flange of an intermediate shaft and we remove a flange.

Key «on 12» we turn on four bolts of fastening of a cover of a drive and we remove it, trying not to damage laying.

We take out a conducted gear wheel of a drive.

We wrap two bolts (М8) in carving openings of an end face of an intermediate shaft.

Key «on 12» we turn on a nut of fastening of a gear wheel of an intermediate shaft, rotating a shaft a screw-driver inserted between bolts.

We take out from the block an intermediate shaft, …

… its gear wheel …

… and six-sided roller of a drive.

We collect a drive in return sequence. Thus the six-sided roller of a drive we recommend to establish in the last turn.