Sable car GAZ-2752, 2217, 2310>> Appendices>> Precautionary measures at diagnostics of system of ignition of the ZMZ-4063 engine and car repairs

Precautionary measures at diagnostics of system of ignition of the ZMZ-4063 engine and car repairs

Remove plugs from conclusions of the storage battery before a detachment of the control unit and removal of any elements of system.

Connect and disconnect the storage battery only at the switched-off ignition.

Start up the engine, having convinced of reliable contact of plugs to conclusions of the storage battery.

Charge the storage battery, only having disconnected it from an onboard network.

Disconnect and connect sockets of elements of system only at the switched-off ignition.

In order to avoid damage by the electrostatic category of elements of the control unit do not concern its conclusions.

Do not use as a sampler a lamp in capacity more than 3,5 W.

For measurement use a tester with nominal internal resistance of 10 megohms/century.

Before car drying in the painting chamber (with temperature 80 °C are higher) remove the control unit.

Before carrying out electrowelding works on a body and units of the car disconnect a block of the control unit and the storage battery.