Sable car GAZ-2752, 2217, 2310>> Appendices>> Imbalance of rotating details, admissible at assembly of engines
Imbalance of rotating details, admissible at assembly двигателей*
Detail
|
Balancing method
|
Admissible imbalance, g • cm, no more
|
Way of elimination of an imbalance
|
Cranked shaft
|
The dynamic
|
18 on each end
|
Metal drilling in the radial direction from counterbalances a drill of Ø 14 mm on depth of 25 mm
|
Flywheel with a wreath
|
The static
|
15
|
Metal drilling from outside, opposite to coupling fastening on radius of 115 mm a drill of Ø 14 mm on depth of 14 mm (on depth of 12 mm taking into account a drill cone). To drill no more than 10 openings. Distance between axes not less than 18 mm
|
Press disk of coupling with a casing assembled
|
The static
|
10
|
Installation and priklepyvaniye balancing грузиков in openings of a flange of a casing of coupling. Drilling in a flange of a casing of openings of Ø 9 mm located on Ø 273 mm between openings under balancing грузики is allowed
|
Pulley of a cranked shaft with a damper
|
The static
|
10
|
Metal drilling in the radial direction from a damper disk a drill of Ø 10 mm on depth no more than 10 mm. To drill no more than 3 openings. Distance between axes not less than 18 mm
|
* the Cranked shaft, a flywheel and coupling assembled are not balanced.
|