Sable car GAZ-2752, 2217, 2310>>

Periodic maintenance (TO-1, TO-2, WITH)

Content of works and technique of their carrying out

Periodicity

Tool and accessories

TO-1

TO-2

WITH

ZMZ-4063 engine

To check:

  • condition and tightness of systems of cooling, food, greasing

+

+

Visually

  • work of drives air and carburetor butterfly valves

+

+

Key of 10 mm, screw-driver

  • operability of system of a retsirkulyatsiya of the fulfilled gases

+

+

  • tightness of system of ventilation of a case of the engine

+

Pyezometr

  • engine mount condition

+

Visually

  • density of cooling liquid (autumn)

+

Areometer

To check fastening:

  • flanges and arm of reception pipes of the exhaust silencer

+

Keys 13, 14 mm

  • cross-pieces of an engine mount, pillows

+

Keys 14, 17 mm

  • final collector, inlet pipeline, pipes of system of vypuskaotrabotavshy gases, exhaust silencer, resonator

+

Keys 13, 14 mm

  • case pallet

+

Key of 13 mm

  • filter settler, filter of thin purification of fuel, fuel pump, carburetor

+

Key of 13 mm

  • radiator and the water pump, the case of the thermostat, a pulley of the pump of cooling liquid and a tension roller

+

Key of 13 mm

  • generator and starter

+

Keys 17, 19 mm

  • drives air and carburetor butterfly valves

+

+

Key of 10 mm, screw-driver

To adjust:

  • tension of a belt of a drive of auxiliary units

+

+

Ruler, keys 12, 13 mm,

  • minimum frequency of rotation of a cranked shaft idling

+

+

Tachometer, screw-driver

  • and the content of oxide of carbon (WITH) and hydrocarbons (SN)

gas analyzer

  • gap between electrodes of candles

+

+

Shchup, candle key

  • fuel level in the poplavkovy chamber of the carburetor (spring)

+

Ruler

To clear:

  • the case of the air filter and to replace filtering element

+ +

+

Source of the compressed

  • control opening in the pump for an exit of cooling liquid

+

Metal core of D 3 mm

  • the case of the fuel filter settler and its filtering element

+

Keys 10, 12 mm, flat-nose pliers, unleaded gasoline, rags

  • to replace filtering element of the filter of thin cleaning топлива*
  • *Для the filter with a paper element.

+

  • opening of the valve of a retsirkulyatsiya of the fulfilled gases in the inlet pipeline and to blow the inlet pipeline, previously having removed the carburetor and the retsirkulyatsiya valve

+ + +

Wire of D 4 mm, source of the compressed air

  • mesh filter of the fuel pump (autumn)

+

Unleaded gasoline, source of the compressed air

  • insulators of spark plugs and pomekhopodavitelny tips

+

+

Unleaded gasoline, rags

  • external surfaces of devices of system of ignition

+

Unleaded gasoline, rags

  • system of ventilation of a case, air jets of the carburetor and ventilation channels in the case of mixing chambers of the carburetor

+

Unleaded gasoline, source of the compressed air, Keys 10, 13 mm, a screw-driver, solvent

To merge a sediment from a fuel tank

+

Key of 24 mm

To merge a sediment from the case of the fuel filter settler

+

Key of 17 mm

To replace candles

+ +

Key candle

Transmission

To check:

  • condition and tightness of a hydraulic actuator of coupling, cases of a transmission and back bridge

+

+

Visually

  • inhaling of a nut of a flange of a leading gear wheel of the back bridge

+

Keys 14, 17, 27 mm

  • fastening of a reducer of the back bridge

+ +

Key of 14 mm

  • fastening of the main thing and the worker of cylinders of coupling, axis of a pusher of the main thing – the coupling cylinder

+

Keys 13, 17 mm

  • coupling case to the block of cylinders of the engine

+

Key of 14 mm

  • fastening of a transmission and its cases

+

Keys 12, 19 mm

  • fastening of flanges of driveshafts, arm of an intermediate support

+

Keys 10, 13, 14, 17 mm

To clear:

  • сапуны transmission and back bridge

+

Rags

Running gear

To check:

  • adjustment of bearings of naves of forward wheels

+

Key for nuts of wheels, naves, a vorotok, flat-nose pliers, a hammer

  • adjustment of bearings of naves of back wheels

+

Key for nuts of wheels, nave bearings, a vorotok

  • condition of tires and wheels

+

+

Visually

  • existence and size люфта in suspension bracket hinges

+

Jack, indicator, stripper of hinges of a suspension bracket, keys 14, 17, 30 mm, screw-driver, flat-nose pliers

  • condition of protective caps of hinges of a suspension bracket

+

+

Visually. A stripper, the plug for a cap press fitting, a key of 24 mm, flat-nose pliers

To check and if necessary to adjust:

  • convergence of forward wheels

+

+

Stand, keys 12, 13, 22 mm, small beards

  • corners of installation of forward wheels

+

Stand, keys 12, 13, 22 mm, small beards

To check an inhaling:

  • nuts of wheels and nuts of hairpins of semi-axes

+

Keys 13, 22 mm

  • nuts of bolts of rezinometallichesky hinges of a suspension bracket

+

Key of 24 mm

  • nuts of step-ladders of springs

+

Key of 24 mm

  • top and bottom ends of shock-absorbers

+

Key of 19 mm

  • bolts and nuts of fastening of hinges of a suspension bracket

+ +

Keys 14, 17, 30 mm

If necessary to rearrange and отбалансировать wheels on the balancing machine

+

Key of nuts of wheels of 27 mm

Steering

To check:

  • tightness of the helmsman механизма*

+

Visually

  • tightness of GUR system **

+

Visually

  • absence люфта in hinges of steering drafts

+

Stripper, the plug for a cap press fitting, a key of 24 mm, flat-nose pliers

  • condition of protective caps of hinges of steering drafts

+

+

Visually. A stripper, the plug for a cap press fitting

  • люфт hinges of a steering column

+

Visually

  • inhaling of a nut of a soshka

+

Key of 36 mm

  • fastening of fingers of hinges of steering drafts

+

Key of 24 mm

  • fastening of a case of the steering mechanism to an arm and an arm to a longeron

+

Keys 14, 17 mm

  • inhaling of nuts of fastening of hinges of a steering column and existence шплинтов on wedges

+

Key of 13 mm

  • fastening of a steering column to a body and a steering wheel to a shaft

+ +

Keys 12, 24 mm

To check, if necessary:

  • to eliminate люфт in bearings of the screw and in pair gearing nut sector of the steering mechanism

+

Special keys

  • to adjust the mechanism of fixing of a steering column

+

  • to adjust effort of turn of pendular levers

+ +

Dynamometer, key of 24 mm

Brake system

To check a condition and tightness of a hydraulic actuator of brakes

+

+

Visually

To check a condition of brake shoes of forward brake mechanisms

+

+

Calliper

To check a condition:

  • brake disks

+

+

Calliper

  • brake overlays of back brake mechanisms

+

Calliper

  • brake drums

+

Calliper

  • protective covers of wheel cylinders and brackets

+

Visually

  • cables of a drive of lay brake system and their covers

+

+

Visually

  • sensor of a signaling device of emergency falling of level of brake liquid

+

+

Visually

To check fastening:

  • the main cylinder to the vacuum amplifier and the amplifier to a body

+

Key of 17 mm

  • axes of a pusher of the vacuum amplifier, axis of a pedal of a brake

+

Key of 17 mm

  • wheel cylinders, regulator of pressure and boards of back brakes

+

Keys 10, 12, 13, 17 mm

To adjust a tightness of a loading spring of a regulator of pressure of back brakes and a course of the lever of the parking brake

+

Keys 8, 22 mm

Electric equipment

To clear the storage battery of a dust and dirt. The electrolit which has got on a surface of the battery to remove with the pure rags moistened in 10 %-numbers solution of liquid ammonia or baking soda, then a surface to wipe dry

+

+

Rags, 10 %-ny solution of liquid ammonia or baking soda

To check fastening of the battery and reliability of contact of plugs of wires with battery conclusions (autumn)

+

Any greasing, keys 12, 14 mm

To check electrolit level

Visually

To check electrolit density (autumn)

Areometer, thermometer

To check:

  • operation of the generator on a signaling device and the voltmeter in a combination of devices

+

Visually

  • condition of shchetochny knot of the generator (autumn)

+

Screw-driver, keys 8, 10, 12, 13, 17 mm, ruler, rags

To adjust head headlights

+

Screen, screw-driver

To adjust fog lights (for the bus into 6 passenger seats)

+

Screen, key of 19 mm

To clear external surfaces of a starter and the generator, if necessary to blow the compressed air

+

Source of the compressed air

Body

To check work:

  • window regulators and scenes of window regulators of doors of a cabin

+

Litol-24 greasing, "Lit"

  • drives of management of a heater and ventilation

+

Key of 10 mm

To check fastening:

  • cabins to a frame

+

Key of 19 mm

  • bodies to a frame

+

+

Key of 17 mm

  • fastening of seats

+

Key of 14 mm

  • rear-view mirrors

+

Key special

To clean drainage openings in the doorway of a cabin, doors and body thresholds

+

Metal core of D 2 mm

* On the car without GUR.
** On the car from GUR.