Sable car GAZ-2752, 2217, 2310>> Appendices>> Daily maintenance (EO)

Daily maintenance (EO)

Content of works

Technical requirements

Tool and accessories

To check level:

  • oils in an engine case

Level of oil should be between labels П and 0 rod indexes

Visually

  • liquids in cooling system

In a broad tank on the cold engine at temperature of 15-20 °C the label of MIN should have a level of cooling liquid or above it on 30–50 mm

Visually

  • liquids in a tank of the main cylinder of a hydraulic actuator of switching off of coupling

Level of liquid should be below the top edge of a tank on 15–20 mm

Visually

  • oil level in a pump GUR* tank

Level of oil should be below the top edge of a tank on 9–14 mm (for a metal tank) or between labels on the tank case (for a plastic tank). At insufficient level of oil it is necessary to check tightness of GUR system

Visually

  • liquids in a tank of the main cylinder of brake system

Level of liquid should be above MIN label on a tank

Visually

To check tightness
power supply systems, greasings, coolings, having paid attention to a condition of hoses and топливопроводов

Podtekaniye of fuel, oil and cooling liquid is not allowed.
On an external surface of hoses and топливопроводов cracks it is not allowed

Visually

To check serviceability of working brake system

1. At the working engine by pressing a brake pedal it should not reach a cab floor. The gap between a cab floor and a pedal should be not less than 25 mm
2. At ignition inclusion: the signaling device of emergency falling of level of brake liquid should not light up; by pressing a cap of a tank of the main brake cylinder the signaling device of emergency falling of level of brake liquid should light up

Ruler

To check operability of lay brake system

The lever of a brake should move on 15-20 teeths (clicks)

To check pressure of air in tires, if necessary, to finish it to norm

To check on cold tires (to a trip)

Manometer

To check total люфт a steering wheel

Total люфт on a rim of a steering wheel should not exceed 37 mm (35 mm *) by buses and 45 mm (43 mm *) on other updatings in each party from neutral situation

Ruler

To check action
instrumentations, screen wiper, lighting and alarm system devices

At the working engine to be convinced of serviceability of devices by their consecutive inclusion

Visually

* On the car from GUR.