Sable car GAZ-2752, 2217, 2310>> Appendices>> The sizes of interfaced details of a steering, mm

The sizes of interfaced details of a steering, mm

Interfaced details

Opening

Shaft

Landing

Case – the screw bearing

Ø62±0,015

Ø62 - 0,013

Tightness 0,015
Gap 0,028

The top cover – the screw bearing

Ø62±0,015

Ø62 - 0,013

Tightness 0,015
Gap 0,028

Case – the top cover

Ø80 +0,035

Ø80 - 0,036
- 0,071

Gap 0,106
0,036

Case – the shaft sector bearing

Ø75 +0,03

Ø75 - 0,010
- 0,029

Gap 0,059
0,010

The screw of the steering mechanism – the bearing

Ø20 - 0,01

Ø62 +0,015
+0,002

Tightness 0,025
0,002

The screw – balls – гайка*

Gap 0,016
0,032*

Shaft sector – the bearing **

Ø40±0,008

Gap 0,010
0,042 **

Axial moving of a shaft sector ***

Gap 0,025
0,085 ***

The screw of the steering mechanism – a fork

Ø20 +0,203
+0,073

Ø20 - 0,021

Gap 0,224
0,073

Pipe of a column of a steering – the bearing

Ø37 - 0,06
- 0,16

Ø37 - 0,009

Tightness 0,160
0,051

Shaft of a steering column – a fork

Ø20 - 0,01

Ø20 +0,052

Gap 0,203
0,125

Fork – the driveshaft bearing

Ø19 - 0,021

Ø19 - 0,009

Tightness 0,021
Gap 0,009

The bearing – a driveshaft crosspiece

Ø10 +0,035
+0,015

Ø10 +0,005
- 0,009

Gap 0,044
0,020

* Landing is provided with selection from 6 dimensional groups of screws, 6 dimensional groups of nuts and 6 dimensional groups of balls.
** Landing is provided with selection from 10 dimensional groups of rollers and 5 groups of external rings of bearings.
*** Landing is provided with selection of lock rings from 10 dimensional groups in thickness of 1,7 mm with a difference in the sizes to 0,02 mm.
The parameters noted by one and two asterisks, at repair are not subject to restoration.