Sable car GAZ-2752, 2217, 2310>> Ventilation and heating system>> Removal and dismantling of an additional heater

Removal and dismantling of an additional heater

 PERFORMANCE ORDER

We remove a forward passenger seat (see. Removal of passenger seats).
We merge cooling liquid (see. Replacement of cooling liquid).

By crosswise screw-driver it is turned on four самореза …

… also we remove a lattice of an additional heater.

We disconnect tips of two wires from resistor conclusions.

We disconnect a block of wires of the electric motor.

Screw-driver we weaken an inhaling of collars …

… also we remove hoses from branch pipes of a radiator of an additional heater.

Key or head «on 12» we turn on two bolts of fastening of a casing of a radiator of an additional heater to an arm.

We remove a heater.

It fastens to an arm through rubber washers and steel plugs.

Holding bolts of fastening of a cap of the electric motor from a provorachivaniye a key «on 10», by the second same key it is turned on four nuts …

… also we remove a cap. For laying of wires on a cap dredging is executed.

We remove the electrofan.

Under it rubber sealing laying is established.

By screw-driver it is turned on two screws of fastening …

… also we remove a krylchatka from an electric motor shaft.

Key «on 8» we turn on two nuts of fastening …

… also we remove a flange of the electric motor and rubber sealing laying.

Key «on 10» we turn on two bolts of fastening …

… also we remove the electric motor resistor with sealing laying.

By screw-driver it is released two brackets of fastening …

… also we uncover a casing.

Similarly we remove the second cover.

We release two more brackets of fastening …

… and, having separated half of a casing of a heater, we take out from it a radiator.

At radiator replacement with a key «on 19» we turn on from it plastic branch pipes and if necessary we rearrange them on a new radiator.

Having replaced faulty details and having washed out a radiator, we collect and we establish a heater in return sequence then we fill system of cooling with liquid (see. Replacement of cooling liquid).