Sable car GAZ-2752, 2217, 2310>> Frame, cabin, body>> Removal of the lock of a cowl and its drive

Removal of the lock of a cowl and its drive

 PERFORMANCE ORDER

Holding a key «on 8» the cable clip stopper, the second same key turned on on 2–3 turns its bolt and remove a clip stopper from draft of a drive of the lock of a cowl.

Key «on 10» we turn on a bolt of fastening of a cover of draft.

Key «on 12» we weaken an inhaling of a bolt of fastening of a cover of draft and we remove draft from the top panel of facing of a radiator.

Key «on 8» we turn on four bolts of fastening of the lock to the top panel of facing of a radiator...

... we remove the lock and an emphasis with a clip.

Key «on 10» we turn on two bolts of fastening of a safety hook to a cowl …

… also we remove it together with a spring.

Sliding пассатижами or a key «on 36» we turn on a clamp nut …

… also we remove a clamp together with a spring and a washer.

We establish details in return sequence. For adjustment of position of the lock …

... we weaken an inhaling of a nut of a clamp; by a shlitsevy screw-driver it is wrapped or we turn on a clamp, achieving a dense prileganiye of a cowl in a closed position, accurate operation of the lock and absence люфтов. We tighten a clamp nut, keeping him a screw-driver from a provorachivaniye.