Sable car GAZ-2752, 2217, 2310>> Frame, cabin, body>> Features of repair of salon of updating "Luxury">> Removal of a partition of salon and its upholstery

Removal of a partition of salon and its upholstery

 PERFORMANCE ORDER

We remove cabin seats (see. Removal of a passenger seat of a cabin).
From a cabin we remove lateral overlays of a partition (see. Removal of a seat belt of a forward seat).

By crosswise screw-driver it is turned on remained саморезы fastenings and we remove the central overlay of a partition.

We remove an angular upholstery of a rack on the left side (see. Removal of a seat belt of a forward seat).
Having taken out ten plastic clamps, …

… we remove an upholstery from a cabin.

We remove the right angular upholstery of a rack (see above).
We remove a forward seat of salon (see. Removal of forward seats of salon).
From salon we remove facing of an additional heater (see. Removal and dismantling of an additional heater).

Having hooked a screw-driver, we take out a plastic clamp of fastening and we remove a rack upholstery from salon.

Having hooked a screw-driver four spring clamps of the top part of an upholstery, …

… we remove its right part.

Similarly we remove the left part.

By crosswise screw-driver it is turned on саморезы fastenings of the lower part of an upholstery …

… also we remove it.

We remove a partition, for what:

crosswise screw-driver or tubular key «on 8» we turn on on lateral faces and the bottom edge 15 саморезов partition fastenings.

To remove a partition stirs the plait of wires passing through a window under an additional heater.

Not to take out all plait, we recommend to cut it then we remove a partition.
After installation of a partition it is connected the cut wires of a plait (by means of the soldering or blocks) according to color of their isolation. Connection we wind with several layers of an insulating tape.