Sable car GAZ-2752, 2217, 2310>> Frame, cabin, body>> Removal of locks of a back door

Removal of locks of a back door

Removal of the right lock of a back door

 PERFORMANCE ORDER

By screw-driver it is hooked and we open caps of the handle of a door.

Head «on 10» we turn on two bolts of fastening of the handle and we remove it.

The same key turned on a bolt of fastening of a clip of the limiter and remove it.

By the same key it is turned on two bolts of fastening of an arm of the limiter and we remove it together with the limiter.

The screw-driver turned on the screw of fastening of the socket of the internal handle.

We remove the socket.

Hooking a screw-driver, we remove eight plastic clamps of an upholstery of a door.

We remove an upholstery.

Having hooked a screw-driver, we disconnect draft of the switch of the lock from a switch lead.

By flat-nose pliers with thin sponges it is taken out шплинт fastenings of a lead and we remove a lead from the switch (the lead can be removed from the switch and together with draft).

Key «on 8» we turn on on 2–3 turns a bolt of fastening of the switch of the lock …

… also we take out the switch.

By screw-driver it is hooked and we disconnect draft of the internal handle.

By screw-driver it is turned on two screws …

… also we remove the internal handle together with draft.

We turn on the button of blocking of the lock.

By screw-driver it is turned on two screws of fastening of an arm of the lever.

We take an arm with the lever aside and through an aperture a screw-driver we hook a clip of draft of the lock.

We disconnect draft from the lever and we remove the lever with an arm and draft of the button of blocking of the lock.

By big screw-driver it is turned on two screws of fastening of the locking mechanism …

… also we remove the mechanism.

Face key or head «on 8» we turn on two bolts of fastening of a drive of the external handle.

We remove a drive together with the lock.

Head «on 8» we turn on two bolts of fastening of the external handle.

We remove the handle.

Head «on 12» we turn on a clamp of the lock of the right door (on the left door) …

… also we remove a clamp.

Key «on 8» we turn on two bolts of fastening …

… also we remove the top and bottom limiters of vertical moving of a door.

We assemble the right lock of a back door in return sequence, having greased all rubbing connections by engine or transmission oil.