Sable car GAZ-2752, 2217, 2310>> Frame, cabin, body>> Removal of mechanisms of opening of a movable door

Removal of mechanisms of opening of a movable door

 PERFORMANCE ORDER

We remove a movable door (see. Removal of a movable door).

Key or head «on 8» we turn on four bolts of fastening of a casing of the top directing.

We remove a casing.

Having weakened a lock-nut inhaling, we turn on a bolt of fastening of the top support to the roller carriage (see. Adjustment of a movable door).

We disconnect the top support from the carriage.

We remove the carriage with a roller from the top directing.

Head «on 10» we turn on four bolts of fastening of the top directing.

We remove the top directing.

By the same key it is turned on two bolts of fastening of a support top directing to a body.

We remove a support.

Having hooked 12 clamps (see. Removal of an upholstery of a movable door), we remove an orgalitovy upholstery over an arch of the right back wheel.

Head «on 13» from salon we turn on four nuts of hairpins of fastening of the average directing.

Key «on 12» we turn on a bolt of external fastening of the average directing.

We remove the average directing.

Between directing and a body rubber sealing laying is established.

By screw-driver it is hooked and we remove a cap (or a plafond) in facing of a step of a body.

In the opened niche a head «on 12» we turn on a bolt of forward fastening of the bottom directing.

Head «on 10» we turn on three other bolts of fastening of the bottom directing.

We remove the bottom directing.

We establish directing to a movable door in return sequence and we cover with greasing Litol-24 or CV JOINT-4 their working surfaces, and also axes of small rollers of average directing and the bearing of the top roller.