We remove an upholstery of a forward door (see. Removal of an upholstery of a forward door).

The screw-driver turned on the screw of fastening directing glasses …

… also we take out it.

Screw-driver we disconnect draft of the internal handle from the lock.

By screw-driver it is turned on two screws of fastening of the internal handle of the lock.

We remove the handle together with draft.

Screw-driver we disconnect draft of the external handle of a door from the lock.

Key «on 10» we turn on two bolts of fastening of the handle of a door.

We remove its external …

… and internal parts.

We disconnect draft from the lock switch.

We turn on the button of blocking of the lock.

By screw-driver it is turned on two screws of fastening of the locking mechanism of the lock …

… also we remove it.

By screw-driver it is turned on two screws of fastening of an arm of a drive of the lock.

We take out the lever mechanism of the lock together with an arm of a drive and drafts.

Key «on 10» we turn on on 2–3 turns a lock bolt of fastening of the switch of the lock.

From the interior of a door thin flat-nose pliers rasshplintovyvay also we remove from the switch a lead (for descriptive reasons details are shown on the removed switch).

We take out the lock switch.

The lead is established on the lock switch only in one situation.

By big screw-driver it is turned on two screws of fastening of a clamp of the lock to a body (cabin) …

… also we remove a clamp.

We put the lock in return sequence, having greased rubbing connections (it is possible to dip the mechanism into engine oil and let's flow down to surpluses).
Having established a clamp, we check operation of the lock. At the correct adjustment the lock should not touch a clamp with the case of the locking mechanism. Otherwise we weaken screws of fastening of a clamp and, moving it along the extended openings, we regulate its situation then we tighten clamp screws.