Sable

General information
Governing bodies and devices
ZMZ-4063 engine
Power supply system
K-151 carburetor
Cooling system
System of production of the fulfilled gases
Coupling
Transmission
Kardanny transfer
Zadny Bridge
Forward suspension bracket
Back suspension bracket
Steering
Brake system
Electric equipment
   Check of electric chains
   Replacement of fuses
   Storage battery
   Generator
   Starter
   Ignition system
   Check and replacement of the sensor of synchronization
   Removal and check of the sensor of a detonation
   Removal and check of the sensor of temperature
   Check and replacement of coils of ignition
   Check of high-voltage wires and tips of candles
   Removal of spark plugs
   Removal and check of the sensor of absolute pressure
   Lighting, light and sound alarm systems
   Podrulevye switches
   Screen wiper and windscreen washer
   Control devices
      Removal of a combination of devices, replacement of lamps
      Check of control devices and sensors
   Ignition switch
Frame, cabin, body
Ventilation and heating system
Diagnostics of malfunctions
Appendices



bd34e463


Sable car GAZ-2752, 2217, 2310>> Electric equipment>> Control devices>> Removal of a combination of devices, replacement of lamps

Removal of a combination of devices, replacement of lamps

 PERFORMANCE ORDER

We disconnect the storage battery.

By short crosswise screw-driver it is turned on two самореза the top fastening of facing of a combination of devices …

… and two самореза bottom fastening.

We remove facing.

Passatizhami is turned on a nut of fastening of the handle of zeroing of the counter of daily run.

Utaplivayem the handle in the panel.

By long shlitsevy screw-driver it is turned on two screws from end faces of a combination of devices.

Having taken out a combination of devices from the panel, …

… we turn on a cap nut of fastening of a cable of a drive of a speedometer.

We disconnect three blocks of wires from a combination of devices.

Blocks differ on color and quantity of conclusions therefore to mark them it is not necessary.
For replacement of lamps of illumination of devices, …

… having turned a cartridge counter-clockwise, we take out it from a combination of devices …

… also we replace a faulty lamp.

For replacement of a lamp of a signaling device …

… we turn a cartridge counter-clockwise and we take out it from a combination of devices.

Faulty lamp we replace together with the boss.

We collect and establish a combination of devices in return sequence.