Sable car GAZ-2752, 2217, 2310>> Electric equipment>> Lighting, light and sound alarm systems>> Removal of lamps of a cabin and salon

Removal of lamps of a cabin and salon

 PERFORMANCE ORDER

We disconnect the storage battery.
Removal of a plafond of illumination of a footboard is shown in the section Removal of a covering of a floor.
For replacement of a lamp of the lamp, …

… having slightly compressed fingers a rasseivatel in the middle of long lateral faces or having hooked a screw-driver, we remove it.

By thin screw-driver it is turned on two самореза.

We remove a bracket of fastening of a lamp.

We remove a block of wires from lamp conclusions.

New lamp we establish in return sequence.
For lamp removal …

… by a thin screw-driver it is pressed a clamp …

… also we remove the lamp.

We remove tips of wires from lamp conclusions.

For replacement of lamps of illumination of a forward part of a cabin …

… a thin screw-driver we draw in a clamp...

… also we remove a plafond.

We take out a faulty lamp.

For replacement of a lamp of a lamp of a directional light …

… we mark an order of connection of wires and it is removed their tips from plafond conclusions.

By thin screw-driver it is turned on three самореза and we remove a lamp …

… and two laying.

Having hooked a pricker, …

… we take out a cartridge with a lamp …

… also we replace a lamp.

We collect and establish a plafond upside-down. At assembly be convinced that …

… the ledge in an opening of a plafond entered into a cut of the case of a lamp.

For replacement of a lamp of illumination of cargo salon …

… by a crosswise screw-driver it is turned on two screws and we remove a rasseivatel.

We take out a lamp from the boss.

For removal of a plafond we mark an order of connection of wires …

… also we disconnect them.

Having pressed a finger on a clamp, …

… we remove a plafond from an arm.

We establish a plafond in return sequence.