Sable car GAZ-2752, 2217, 2310>> Electric equipment>> Generator>> Replacement of a regulator of tension

Replacement of a regulator of tension

 PERFORMANCE ORDER

The regulator of tension is executed in the uniform case with a shchetkoderzhatel.
We disconnect the storage battery.
We disconnect wires from generator conclusions (see. Removal and generator repair).

Key «on 10» we turn on a nut …

… also we remove a tip of a wire of the condenser from a conclusion «+» the generator.

Key «on 8» we turn on a nut of fastening of the condenser …

… also we remove it.

Head «on 8» we turn on two nuts of fastening of a plastic casing of the generator …

… also we remove a casing.

We remove a shtekerny block from a conclusion of a regulator of tension.

By short screw-driver it is turned on two screws of fastening of a regulator to the generator.

We remove a tension regulator assembled with a shchetkoderzhatel.

We establish a new regulator in return sequence.