Sable car GAZ-2752, 2217, 2310>> Brake system>> Dismantling of the mechanism of the parking brake

Dismantling of the mechanism of the parking brake

 PERFORMANCE ORDER

It is more convenient to work at a viewing ditch.

We lower the lever of the parking brake.
Rasshplintovyvayem also we take out an equalizer axis (see. Replacement of cables of a drive of the parking brake).

Two keys «on 24» raskontrivay nuts of back fastening of a cover of the central cable and completely we turn on an external nut.

Key «on 10» we turn on a nut of a bolt of fastening of a cover of a cable to a cross-piece arm.

We disconnect a cable from the basic …

… and additional arms.

We remove driver's and passenger seats and we lift a floor covering. If to remove seats it is inconvenient, it is possible to cut a covering across under the lever of the parking brake and to dissolve edges in the parties, having opened access to nuts of fastening of the mechanism of the parking brake.

We remove a shumoizolyatsionny covering of a floor.

We disconnect tips of wires from the switch of a signaling device of the parking brake.

Key «on 10» we turn on six nuts of fastening of the mechanism to a floor.

We remove the mechanism together with the central cable.

Key «on 24» we turn on an external nut of fastening of a cable.

Rasshplintovyvayem lever axis, …

… we remove a washer …

… also we take out a lever axis.

Key «on 17» we turn on two nuts of fastening …

… also we remove an arm of the switch of a signaling device of the parking brake.

We remove the lever from the basis.

We remove a cable.

We take out from openings two bolts of fastening of the lever.

Having replaced worn-out details, we assemble the mechanism in return sequence. On an axis of the lever we put any plastic greasing.