Sable car GAZ-2752, 2217, 2310>> Brake system>> Removal of pedal knot

Removal of pedal knot

 PERFORMANCE ORDER

We disconnect the storage battery.
We remove overlays of a steering column (see. Removal and dismantling of a steering column).
We disconnect tips of wires from the switch of a signal of braking (see. Replacement of the switch of a signal of braking).
We disconnect from pedals rods of the vacuum amplifier and the main cylinder of a hydraulic actuator of coupling (see. Replacement of the vacuum amplifier, Removal of the main cylinder of a hydraulic actuator).
We tie up the vacuum amplifier to an arm of a screen wiper and we turn on four nuts of fastening of the amplifier. We nominate him in a motor compartment so that hairpins of fastening left body openings (see. Replacement of the vacuum amplifier).

Head «on 12» we turn on two bolts of fastening of pedal knot.

We disconnect tips of wires from the switch of the storage battery (see. Replacement of the switch of the storage battery).

Head «on 10» we turn on two nuts of fastening of an arm of the switch of the alarm system.

Head «on 12» we turn on four bolts of fastening of a steering column and carefully (not to damage a wire of switches) we lower a steering column on a seat.

We remove a combination of devices, without disconnecting from it blocks of wires (see. Removal of a combination of devices, replacement of lamps), and through the formed aperture …

… a head «on 12» we turn on two bolts of the top fastening of pedal knot.

We remove pedal knot (the steering column is for descriptive reasons removed).

We establish pedal knot in return sequence, having put on axes of pedals any plastic greasing.