Sable car GAZ-2752, 2217, 2310>> Back suspension bracket>> Removal of the stabilizer of cross-section stability and replacement of its plugs

Removal of the stabilizer of cross-section stability and replacement of its plugs

 PERFORMANCE ORDER

It is more convenient to work at a viewing ditch.

Back wheels should be equally loaded, or are hung completely out.

Keys «on 14» and «17» we weaken an inhaling of four bolts which are pulling together cheeks of an earring of the stabilizer.

Similarly we weaken bolts of the second earring of c of other party of the car.

Key «on 19» we turn on two nuts, holding a key «on 17» bolts of fastening of a holder of the rubber plug to an arm of a beam of the bridge.

Similarly we disconnect the stabilizer from a bridge arm on the other side of the car.

Holding a key «on 22» a bolt of fastening of an earring of the stabilizer to a frame arm, a key «on 14» we turn on a nut …

… also we take out a bolt from the plug.

Having taken out a bolt from the stabilizer plug on the other side of the car, …

… we remove the stabilizer.

We remove rubber plugs together with holders from the ends of a bar of the stabilizer.

Keys «on 14» and «17» we turn on nuts of four bolts which are pulling together an earring.

We separate earring cheeks.

We remove the top rubber plug and we take out the steel rasporny plug.

We remove the plug from a stabilizer bar.

Similarly we remove plugs of the second earring.
We collect and establish the stabilizer in return sequence, having replaced all rubber plugs new.

The final inhaling of nuts of bolts of earrings of the stabilizer should be carried out on the loaded car at the straightened springs. It is necessary for the correct operation of rezinometallichesky hinges.